Ana sayfa Forumlar Soru – Cevap 3d yazıcı hata kodları açıklamaları

1 yazı görüntüleniyor (toplam 1)
  • Yazar
    Yazılar
  • #697
    Cihan Kalmaz
    Anahtar yönetici

    Err1: The hot bed exceeds the maximum temperature limit, please check if the thermal interface is shorted;
    Err2: The nozzle exceeds the maximum temperature limit. Please check if the thermal interface is shorted.
    Err3: The hot bed exceeds the minimum temperature limit, please check if the thermal interface is disconnected;
    Err4: The nozzle exceeds the minimum temperature limit, please check if the thermal interface is disconnected;
    Err5: The nozzle fails to heat up. If the nozzle does not reach the set temperature difference within the set time, an error is reported; please check the configuration file or check whether the power supply is sufficient;
    Err6: The heating of the hot bed fails. If the hot bed reaches the set temperature difference within the set time, an error is reported; please check the configuration file or check whether the power supply is sufficient;
    Err7: Thermal runaway; when the temperature rises to the target temperature, the current temperature is lower than the target temperature value within the set time and the error is exceeded; please check if the thermal is normal or the PID value is correct.

1 yazı görüntüleniyor (toplam 1)
  • Bu konuyu yanıtlamak için giriş yapmış olmalısınız.